technical data sheet sma straight jack 32K107-302L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to iec 60169-15; en 122110; mil-std-348a, fig. 310 documents assembly instruction 32 b21 material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact cube or equiv. aurodur?, gold plated dielectric ptfe crimping ferrule copper gold, 0.1 m
technical data sheet sma straight jack 32K107-302L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 frequency dc to 12.4 ghz vswr 1.05 + 0.01 x f [ghz], dc to 5 ghz insertion loss 0.03 x db, dc to 5 ghz insulation resistance 5 x10 3 m center contact resistance 3 m outer contact resistance 2 m test voltage 1000 v rms working voltage 480 v rms power handling (at 20 c, sea level, vswr 1.0) 200 w @ 2 ghz rf-leakage 100 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles min. 500 center contact captivation: axial 27 n coupling test torque max. 1.7 nm recommended torque 0.8 nm to 1.1 nm environmental data temperature range -55c to +155c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. d shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 2002/95/ec (rohs) compliant tooling crimping tool 11w150-000 crimp insert 11w150-102 suitable cables rg 174 a/u, rg 188 a/u, rg 316 /u packing standard 100 pcs in bag weight 2.78 g/pce draft date approved date rev. engineering change number name date krautenbacher j. 12/09/07 schwangler 23.10.07 b00 07-0260 s. mhlbacher 18/10/07 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be co nstrued as recommendation to infringe exis ting patents. in the effort to improve ou r products, we reserve the right to ma ke changes judged to be necessary.
|
